Fall Gas Furnace Startup

Spring Cooling Startup

Check gas pressure and adjust if necessary

Check freon level and system running pressure

Clean and inspect burner assembly

Check amps on compressor and condenser fan motor

Clean and check ignition system

Oil condenser motor and check bearings

Check motor bearings for wear

Pressure clean and inspect condenser coils

Clean and check blower wheel

Check refrigerant lines for wear or leakage

Check belts and pulleys

Check thermostat

Check belts, change if necessary

Oil blower motor and check amp draw

Check all safeties and limits

Clean blower motor

Check condensate trap and clean

Check filter

Check flue for obstacles and rust

Check and change drain line if necessary

Check pitch of vent pipe

Check filters

Check thermostat and anticipator setting

Check temp across coils

Inspect general condition and operation of furnace